10% DISCOUNT!

10% DISCOUNT ON ALL PRODUCTS UNTIL 4th JULY!

JUST TYPE IN 'DISCOUNT10' INTO THE VOUCHER BOX ON THE BASKET PAGE!

CHECK OUT OUR NEW 'SOLAR SECTION' TO  SEE OUR EXPANDING RANGE OF SOLAR PRODUCTS!

PLEASE NOTE: WE WILL BE CLOSED FROM FRIDAY 17TH JUNE UNTIL FRIDAY 24TH JUNE. PLEASE CONTINUE TO PLACE YOUR ORDERS IF YOU CAN WAIT FOR A FEW EXTRA DAYS, AND STILL TAKE ADVANTAGE OF OUR 10% DISCOUNT!


20W 12V polycrystalline solar panel with 2m cable   £36.99!

20W 12V polycrystalline solar panel with 2m cable 36.99!

£36.99

20W 12V polycrystalline solar panel with 2m cable

Waterproof high efficiency 20W solar panel is perfect for permanent outdoor use to provide free power either directly, such as powering a fan or lights, or for charging a 12V battery to then power hundreds of devices such as in a shed, boat or camper van.

The long-lasting, high-efficiency, polycrystalline solar cells and the tough, sealed, aluminium frame will give you years and years of consistent, free power. Waterproof design ensures the panel can be used in all weather conditions.

The panel comes with 2m cable which is attached to the waterproof junction box at the back. Please note that the junction box goes about 0.5cm beyond the frame, so there must be some space left between the frame and flat surface when mounting the panel (note 1.0 - 1.5cm space under the panel typically recommended for cooling).

If you are planning to use this solar panel for charging a 12V battery: please note this panel requires a solar charge controller / regulator to charge a 12V battery. If you don't have one and would like to buy it, please contact us.

If you already have one of our 20W solar panels or kits with a solar controller, you can easily upgrade the power of your kit to 40W by adding this panel in parallel to the existing 20W solar panel (connecting 2 panels: "+" to "+", "-" to "-" and then to the solar controller).

  • Part No. - IEM-PHUBST-20P
Peak power 20W
Maximum power voltage 17.5V
Maximum power current 1.14A
Open circuit voltage 21.6V
Short circuit current 1.23A
Power allowance range +/- 3%
Dimensions 485 x 345 x 25 mm
Weight 2.0 kg
4 mounting holes
2m cable attached