2.5mm 35/0.30mm Tinned Copper 'OCEAN FLEX' Cable per metre 29.0 amps. 3.0mm o/d. Max. Load (Watts): 12 volts = 348 watts, 24 volts = 696 watts. Tinned Thin Wall Single Core Cables High temperature thin wall low voltage wiring cables suitable for use in the automotive, marine and other harsh environments. The tinned copper conductors make this cable more resistant to corrosion. Manufactured in accordance with ISO6722 : 2006 (class B). Suitable for 12v and 24v systems (maximum 60v). Tinned Copper Conductors – PVC Insulated. Suitable for use at temperatures from -40ºC to +105ºC with excursions up to +120ºC. Reduced insulation gives considerable savings in weight and volume. Good resistance to petrol, diesel, lubricating oils and diluted acid. Very good resistance to corrosion. Hard grade PVC insulation offers good resistance to abrasion and cut through. Cables are printed with the specification on the insulation. OCEANFLEX® Cable is a tinned thin wall low voltage wiring cable designed for use in harsh environments, the copper strands are tin plated, which makes this cable more resistant to corrosion. Why Choose OCEANFLEX® In harsh environments low voltage copper cables corrode over time, the copper oxidises turning black and in salt water environments copper forms a carbonate layer (turquoise). Both these elements cause the cable to have a decreased electrical conductivity. Eventually the cable weakens and causes electrical faults and failures. OCEANFLEX® has been specifically designed to combat these problems. The copper conductors have been tin plated so that they are highly resistant to corrosion over short or long periods of time. Whether caused by moisture, water or salt water. Therefore OCEANFLEX® cables have a much greater life span compared to standard cables, which means lower repair/maintenance cost, less down time due to electrical faults and failures. If designing, building, repairing or changing low voltage electrical wiring that is going to be used in a harsh environment... Choose... OCEANFLEX® E & O E